> GM Global R&D
Asim Tewari Banner
Asim Tewari
design


Publications

 

       

Books

1. A Tewari, K Narasimhan& PP Date (Editors), Lightweighting: possibilities & Challenges: Part-I (pp 1-386) and Part-II (pp 387-750): IDDRG 2012: International Deep Drawing Research Group Conference. Mumbai, India, 25-29 November, 2012.
2. Asim Tewari, Satyam Suwas, Dinesh Srivastava, IndradevSamajdar and ArunansuHaldar (Editors), Textures of Materials - ICOTOM 16 Part 1 (pp 1-522), Part 2 (pp523-1030), December 2011 (ISBN-13:978-3-03785-294-1).


Book Chapter


1. S.Basu and Asim Tewari, Nanostructure Quantifications in Polymer Clay Nanocomposites, chapter in: Kamal K Kar (Ed.), Developments in Nanocomposites, Research Publishing Services, Singapore (ISBN: 978-981-08-3711-2).


Publications in refereed journals (already published)

Sr. No.Publications
68 ChandrashekharHiremath, K.Senthilnathan, N.K.Naik, AnirbanGuha, AsimTewari, Numerical study andexperimental validation of effect of varying fiber crack density onstiffness reduction in CFRP composites" accepted forpublication in the Journal of Materials Engineering and Performance, 2018
67 ChandrashekharHiremath, K.Senthilnathan, N.K.Naik, AnirbanGuha, AsimTewari, Microstructural damage-based micromechanics model to predict stiffness reduction in damaged unidirectional composites, accepted forpublication in the Journal of Reinforced Plastics and Composites, 2018
66 Rishi Sharma, R.N. Singh, Asim Tewari, Optimum Shape and Orientation of δ-Hydride Precipitate in α-Zirconium Matrix for different Temperatures, Journal of Alloys and Compounds, 742, pp 804-813, 2018.
65 ChandrashekharHiremath, K.Senthilnathan, N.K.Naik, AnirbanGuha, AsimTewari, Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP, Composites Science and TechnologyVolume 154, 18 January 2018, Pages 37-44
64 Vivek Kumar Barnwal, ShantaChakrabartyAsim Tewari, K. Narasimhan, Sushil K. Mishra, Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet, Int J AdvManufTechnol (2017), 95(1–4), pp 921–935, 2018. https://doi.org/10.1007/s00170-017-1238-5
63 Kundalkar, D., Singh, R. & Tewari, A., Effect of Friction Models and Parameters on the Lagrangian Flow Fields in High-Temperature Compression Testing, J. of MateriEng and Perform (2017) 26: 4867-4875
62 K. Senthilnathan, Chandrashekhar P. Hiremath, N.K. Naik, AnirbanGuha, Asim Tewari, Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading, Composites: Part A 100 (2017) 118–127.
61 DK Sahoo, P Dewan, P Srivastava, AK Kohli, IPS Sandhu, Rajesh Kumari, DR Saroha, AnirbanGuha, Asim Tewari, RK Singh,Performance of Gamma Chamber under blast loading, Annals of Nuclear Energy 105, 240-248, 2017
60 Rishi Sharma, R.N. Singh and Asim Tewari, Influence of hydride orientation on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between RT and 300 °C, Journal of Nuclear Materials, 2017 Volume 488, May 2017, Pages 231-244.
59 VK Barnwal, R Raghavan, A Tewari, K Narasimhan, SK Mishra, Effect of microstructure and texture on forming behaviour of AA-6061 aluminium alloy sheet, Materials Science and Engineering: A 679, 56-65, 2017
58 Rakesh V. Chaudhari, AshishSaxena, HaritRaval, and Asim Tewari, Formation of Micropillars on Titanium Alloy of Ti6Al4Vby R-MEDM Process, IJAMAE, 3:1, pp 68-74, 2016.
57 Vivek Kumar Barnwal, K. Narasimhan, Asim Tewari, Sushil Mishra, Effect of plastic anisotropy on forming behavior of AA-6061 aluminum alloy sheet, Journal of Strain Analysis for Engineering Design, 51 (7),pp 507-517 2016.
56 A Tripathi, I Samajdar, JF Nie, A Tewari,Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy, Materials Characterization 114(2016) 157-165.
55 A Tripathi, A Tewari, AK Kanjarla, N Srinivasan, GM Reddy, SM Zhu, JF Nie, RD Doherty, I Samajdar, Microstructural evolution during multi-pass friction stir processing of a magnesium alloy, Metallurgical and Materials TransactionsAMay 2016, Volume 47, Issue 5, pp 2201–2216, DOI: 10.1007/s11661-016-3403-0.
54 D Kundalkar, M Mavalankar, A Tewari,Effect of gas nitriding on the thermal fatigue behavior of martensitic chromium hot-work tool steel,Materials Science and Engineering A651 (2016) 391-398.
53 AK Saxena, A Tewari, P Pant, Quantitative analysis of orientation and near neighbor interaction effects during deformation of polycrystalline Ti6Al4V,Materials Science and EngineeringA 648 (2015) 1-8.
52 A Tripathi, A Tewari, N Srinivasan, GM Reddy, SM Zhu, JF Nie, RD Doherty, I Samajdar, Microstructural origin of friction stir processed zone in a magnesium alloy, Metallurgical and Materials Transactions A 46 (8) (2015) 3333–3336.
51 A Omar,A Tewari, K Narasimhan, Formability and microstructure evolution during hydroforming of drawing quality welded steel tube,Journal of Strain Analysis for Engineering Design 50 (7) (2015) 542-556.
50 M Bhargava, A Tewari, SK Mishra, Forming limit diagram of Advanced High Strength Steels (AHSS) based on strain-path diagram,Materials and Design 85(2015) 149-155.
49 OA Pawar, YSGaikhe, A Tewari, RSundaram, SS Joshi, Analysis of hole quality in drilling GLARE fiber metal laminates, Composite Structures 123 (2015) 350-365.
48 S Joshi, A Tewari, SS Joshi, Microstructural characterization of chip segmentation under different machining environments in orthogonal machining of Ti6Al4V,Journal of Engineering Materials and Technology 137 (2015) 011005-1-011005-16.
47 S Joshi, P Pawar, A Tewari, SS Joshi,Influence of β phase fraction on deformation of grains in and around shear bands in machining of titanium alloys,Materials Science and Engineering A 618 (2014) 71-85.
46 SK Mishra,SM Tiwari, JT Carter,A Tewari, Texture evolution during annealing of AZ31 Mg alloy rolled sheet and its effect on ductility, Materials Science and Engineering A 599(2014) 1-8.
45 S Patil, S Joshi, A Tewari, SS Joshi, Modeling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V,Ultrasonics 54 (2) (2014)694-705.
44 S Joshi, P Pawar, A Tewari, SS Joshi, Tool wear mechanisms in machining of three titanium alloys with increasing β-phase fraction, Journal of Engineering Manufacture, Proceedings of The Institution of Mechanical Engineers Part B 228 (9) (2014) 1090-1103.
43 S Joshi, P Pawar, A Tewari, SS Joshi, Effect of β phase fraction in titanium alloys on chip segmentation in their orthogonal machining, CIRP Journal of Manufacturing Science and Technology 7(3)(2014) 191-201.
42 S Joshi, A Tewari, S Joshi, Influence of preheating on chip segmentation and microstructure in orthogonal machining of Ti6Al4V, Journal of Manufacturing Science and Engineering 135 (6) (2013) 061017-1-061017-11.
41 A Tewari, S Vijayalakshmi, S Tiwari, P Biswas, S Kim, RK Mishra, R Kubic, AK Sachdev, Influence of microstructure on uniaxial strain localization in AA5754 aluminum sheets produced by various processing routes, Metallurgical and Materials Transactions A 44 (5) (2013) 2382-2398.
40 S Joseph,A Tewari, S Kumar, The fracture characteristics of a near eutectic Al-Si based alloy under compression, Metallurgical and Materials Transactions A44 (5) (2013) 2358-2368.
39 D Kundalkar, A Tewari, Effect of strain, strain rate and temperature of hot deformation on microstructural evolution of Ti and V microalloyed steel, International Journal of Metallurgical Engineering 2 (2) (2013) 117-124.
38 P Biswas, R Narasimhan, A Tewari, Influence of crack tip constraint on void growth in ductile FCC single crystals, Materials Science and Engineering A 528(3) (2011) 823-831.
37 S Gollapudi, MA Azeem, A Tewari, URamamurty, Orientation dependence of the indentation impression morphology in a Mg alloy,ScriptaMaterialia 64 (2011) 189–192.
36 A Tewari, S Tiwari, P Biswas, S Vijayalakshmi, RK Mishra, Vectorized 3D microstructure for finite element simulations, Materials Characterization 61 (2010) 1211 – 1220.
35 S Tiwari, A Tewari, Inherent limitations of bitmap discretization in quantitative microstructural analysis, Materials Characterization 61 (5) (2010) 493-501.
34 A Tewari, P Biswas, Effect of amount, size and spatial distribution of intermetallicson incipient localization during plastic deformation, Journal of Materials Science 45 (2010) 1567–1578.
33 MA Azeem, A Tewari, S Mishra, S Gollapudi, U. Ramamurty,Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy,ActaMaterialia58 (5) (2010) 1495-1502.
32 MA Azeem, A Tewari, U. Ramamurty, Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy, Materials Science and Engineering A 527 (4-5) (2010) 898-903.
31 H Singh, AM Gokhale, Y Mao, A Tewari, AK Sachdev, Reconstruction and quantitative characterization of multi-phase multi-scale three-dimensional microstructure of a cast Al-Si base alloy, Metallurgical and Materials Transactions B 40B(2009) 859-870.
30 H Singh, AM Gokhale, Y Mao, ATewari, AK Sachdev, Three-dimensional visualization and characterization of morphology and internal microstructural features of primary silicon crystals in a cast Al–Si base alloy, Journal of Crystal Growth 311 (19) (2009) 4454-4461.
29 A Tewari, SMishra, STiwari, Understanding texture domains and relations between pre-eutectic and eutectic phase during Al-Si alloy solidification, Transactions of The Indian Institute of Metals 62 (4-5) (2009) 343-346.
28 H Singh, AMGokhale, ATewari, S Zhang, Y Mao, Three-dimensional visualization and quantitative characterization of primary silicon particles in an Al-Si base alloy, ScriptaMaterialia 61 (4) (2009) 441-444.
27 S Vajpai, RK Dube, A Tewari, Studies on the mechanical alloying of Ni-Fe-Co powders and its explosive compaction, Metallurgical Transactions A 39(11) (2008) 2725-2735.
26 A Tewari, S Tiwari, PBiswas, R Mishra, Cluster identification in AA5754 aluminum sheets using mathematical morphology analysis, Journal of Microscopy 230 (2) (2008) 192-202.
25 SK Basu, ATewari, PDFasulo, WR Rodgers, Transmission electron microscopy based direct mathematical quantifiers for dispersion in nanocomposites, Applied Physics Letters 91 (5) (2007) 053105-1-053105-3.
24 ATewari, Stereological characterization of solidification microstructure, Transactions of Indian Institute of Metals 60 (2) (2007) 273-276.
23 A Tewari, AM Gokhale, Nearest-neighbor distributions in thin films, sheets, and plates, ActaMaterialia 54 (7) (2006) 1957-1963.
22 A Tewari, AM Gokhale, Computations of contact distributions for representation of microstructural spatial clustering, Computational Materials Science 38 (1) (2006) 75-82.
21 A Tewari, JESpowart, AM Gokhale, RS Mishra, DB Miracle, Characterization of the effects of friction stir processing on microstructural changes in DRA composites, Materials Science and Engineering A 428 (1-2) (2006) 80-90.
20 A Tewari, AM Gokhale, Nearest neighbor distances in uniform–random poly-dispersed microstructures, Materials Science and Engineering A 396 (1-2) (2005) 22-27.
19 AM Gokhale, A Tewari, H Garmestani, Constraints on microstructural two-point correlation functions, ScriptaMaterialia 53 (8) (2005) 989-993.
18 ATewari, AM Gokhale, Nearest-neighbor distances between particles of finite size in three-dimensional uniform random microstructures, Materials Science and Engineering A 385 (1-2) (2004) 332-341.
17 ATewari, AM Gokhale, A geometric upper bound on the mean first nearest neighbor distance between particles in three-dimensional microstructures, ActaMaterialia 52 (17) (2004) 5165-5168.
16 T Laha, A Tewari, R Balasubramaniam, MN Mungole, RG Baligidad, Microstructural evolution in iron aluminide Fe-28Al-2C after high-temperature hydrogen treatment, Metallurgical and Materials Transactions A 35 (6) (2004) 1789-1798.
15 A Tewari, AM Gokhale, Nearest neighbor distances in uniaxial fiber composites, Computational Materials Science 31 (1-2) (2004) 13-23.
14 A Tewari, AM Gokhale, JE Spowart, DB Miracle, Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions, ActaMaterialia 52 (2) (2004) 307-319.
13 RK Dube, A Tewari, Some aspects of nanocrystalline materials for electrical and magnetic applications, IETE Technical Review 19 (5) (2002) 317-322.
12 T Laha, J Shankar, R Balasubramaniam, A Tewari, VN Prabhakar, DV Sharma, D Banerjee, Material and electrochemical characterization of ancient Indian OCP period copper, Indian Journal of History of Science 37 (2002) 321-329.
11 A Tewari, AMGokhale, Estimation of three dimensional grain size distribution from microstructural serial sections, Materials Characterization 46 (2001) 329-335.
10 ATewari, AM Gokhale, Application of three-dimensional digital image processing for reconstruction of microstructural volume from serial sections, Materials Characterization 44 (3) (2000) 259-269.
9 A Tewari, AM Gokhale, Efficient estimation of number density in opaque material microstructures: the large-area dissector, Journal of Microscopy 200 (3) (2000) 277-283.
8 A Tewari, Liquid phase sintering in micro-gravity, Current Science 79 (3) (2000) 334-335.
7 MDDighe, A Tewari, G Patel, T Mirabelli, AM Gokhale, Application of digital image processing to reconstruct 3D microporosity in cast A356.0 alloy, Transactions of the American Foundrymen's Society 107 (1999) 353-356.
6 A Tewari, AM Gokhale, RM German, Effect of gravity on three-dimensional coordination number distribution in liquid phase sintered microstructures, ActaMaterialia 47 (13) (1999) 3721-3734.
5 A Tewari, MD Dighe, AM Gokhale, Quantitative characterization of spatial arrangement of micropores in cast microstructure, Materials Characterization 40 (2) (1998) 119-132.
4 MD Dighe, XGJiang, ATewari, ASB Rahardjo, AM Gokhale, Quantitative microstructure analysis of microporosity in cast A356 aluminum alloy, Transactions of the American Foundrymen's Society 106 (1998) 181-190.
3 S Yang, ATewari, AMGokhale, Modeling of non-uniform spatial arrangement of fibers in a ceramic matrix composite, ActaMaterialia 45 (7) (1997) 3059-3069.
2 ATewari, VSRMurthy, GSMurty, Rheological behavior of SiC (particulate)-borosilicate composites at elevated temperatures, Journal of Materials Science Letters 15 (1996) 227-229.
1 ATewari, B Deo, Cell model for calculation of activities in binary oxide systems, ISIJ International 35 (9) (1995) 1141-1144.

Publications in conference proceedings

Sr. No.Publications
56 Nikita Sonar, JyotiJha, SushilMishra,Asim Tewari and JyotiMenghani,"Effect of Thermomechanical Processing on Microstructure of Titanium alloy Ti-6Al-4V".Submitted in Indian Conference on Applied Mechanics(INCAM)during 5-7 July,2017 at MNIT Allahabad.
55 VaibhavBhavsar, Nikhil Gotawala, JyotiJha, Asim Tewari, SushilMishra ,“Friction Characterization and Microstructure Evolution of Ti-6Al-4V during Hot Deformation” submitted in Indian conference on Applied Mechanics (INCAM) during 5-7 July, 2017 at MNIT Allahabad. ISBN: 978-93-80635-28-6.
54 VaibhavBhavsar, JyotiJha, GhanshyamsinhJhala, Alphonsa Joseph, Sushil Mishra, Asim Tewari ,“Characterization of Ti-6Al-4V Alloy Modified by Plasma Nitriding Process” Submitted in proceedings of the ASME Gas Turbine (ASME-GT) India conference during December 7-8, 2017, Banglore.
53 SachinBiradar, JyotiJha, Sushil Mishra, Asim Tewari, "Fatigue Crack Growth Retardation in Titanium (Ti-2.77Sn-0.48Cu-1.15Fe-6.61V) alloy ", Submitted in Indian conference on Applied Mechanics (INCAM) during 5-7 July, 2017, MNNIT Allahabad.
52 SachinBiradar, JyotiJha, Sushil Mishra, Asim Tewari, "Fatigue Crack Growth Retardation in Titanium alloy", Submitted in Proceedings of the ASME Gas Turbine (ASME-GT) India conference during December 7-8, 2017, Bangalore.
51 Nikita Mohite, JyotiJha, Sushil Mishra, Asim Tewari,"Removal of alpha-case layer from heat treated Ti-6Al-4V ", Submitted in Indian conference on Applied Mechanics (INCAM) during 5-7 July, 2017, MNNIT Allahabad.
50 Nikita Mohite, JyotiJha, Sushil Mishra, Asim Tewari, "Development and Removal of alpha-case layer from heat treated Titanium alloy", Submitted in Proceedings of the ASME Gas Turbine (ASME-GT) India conference during December 7-8, 2017, Bangalore.
49 Ganesan G, M V V S Aditya, Akhilesh Gupta, Sonal, Rakesh G Mote, R. Balasubramaniam and A.S. Rao, “Study of Machining Parameters of Focused Ion Beam in Fabrication of Texture on Single Crystal Diamond Tool.” COPEN-10, IIT-Madras Dec 7-9, 2017
48 GovindBhardwaj, Harshil Shah, Ganesh Munge, Suhas Joshi, Asim Tewari, “Experimental investigation of cutting forces in 5-axis milling of aerospace alloys”, COPEN-10, IIT-Madras Dec 7-9, 2017
47 P. H. Maniar, T. Khot, H. Shah, S. Mishra and A. Tewari, “Effects of Heat Treatment on Residual Stresses induced due to turning operation on Invar-36”, COPEN-10, IIT-Madras Dec 7-9, 2017
46 Prasham H. Maniar, Rahul Hari, GauravBisht, Harshil Shah and Asim Tewari, “Machining of Thin wall component on a CNC machine”, COPEN-10, IIT-Madras Dec 7-9, 2017
45 Saurabh S. Kulkarni, Ganesh Munge, H.K. Raval, Asim Tewari, “Experimental Investigation of Cutting Forces in Cutter/Work-piece Engagement Initiation in Ball-End Milling”, COPEN-10, IIT-Madras Dec 7-9, 2017
44 Hodhigere Y., Jha J.S., Tewari A., Mishra S. (2018) Finite Element Analysis-Based Approach for Stress Concentration Factor Calculation. In: Seetharamu S., Rao K., Khare R. (eds) Proceedings of Fatigue, Durability and Fracture Mechanics. Lecture Notes in Mechanical Engineering. Springer, Singapore
43 Lomate, D., Asim Tewari, Date, P., Ukhande, M.,GirishShegavi, RK Prasad Singh., "Fatigue Life Prediction of Induction Hardened Case Depth Specimens Made From 38MnVS6 Micro Alloyed Steel," SAE Technical Paper 2017-01-0357, 2017, doi:10.4271/2017-01-0357.
42 DK Sahoo, A Guha, Asim Tewari, RK Singh, Performance of Monolithic Plate and Layered Plates Under Blast Load Procedia Engineering 173, 1909-1917
41 JyotiJha, Asim Tewari, Sushil Mishra, Constitutive Relations for Ti-6Al-4V Hot Working, Procedia Engineering, accepted DOI, 10.1016/j.proeng.2016.12.089
40 JigarGoda, Swarnendu Bhattacharya, MananDharod, SwethaManian Sridhar, Asim Tewari, “Characterization using Four Dimensional X-ray Micro-Tomography of GFRP composites manufactured by VARTM process”, Proceedings of 14th ISAMPE National Conference on Composites (INCCOM-14), Hyderabad, January 22-23, 2016
39 JyotiJha, Asim Tewari, Sushil Mishra, SurajToppo, Constitutive Relations for Ti-6Al-4V Hot Working, Procedia Engineering, 10.1016/j.proeng.2016.12.089
38 GautamSalkar, Jayaraman M, Bachchan Kumar Mishra, SwethaManianSridhar,Asim Tewari, “3D simulation of curing process of epoxy resin impregnated composite manufactured by VARTM”, Proceedings of 14th ISAMPE National Conference on Composites (INCCOM-14), Hyderabad January 22-23, 2016
37 A Omar, KR Harisankar, A Tewari, K Narasimhan, Study of Fracture Behaviour and Strain Path During Tube Hydrforming Process, Journal of Physics: Conference Series 734 (3), 032105
36 A Omar, KR Harisankar, A Tewari, K Narasimhan, Effect of Geometric Parameters on Formability and Strain Path During Tube Hydrforming Process, Journal of Physics: Conference Series 734 (3), 032104
35 C Hiremath, K Senthilnathan, A Guha, A Tewari, Effect of Volume Fraction on Damage Accumulation for a Lattice Arrangement of Fibers in CFRP, Materials Today: Proceedings 2 (4), 2671-2678, 2015
34 VaibhavShinde, Jyoti S Jha, Asim Tewari, SushilMishra,“ModifiedRainflow Counting Algorithm for Fatigue Life Calculation”, Fatigue Durability India, Sept, 2016, Bangalore
33 Yuvraj HS, Jyoti S Jha, Asim Tewari, Sushil Mishra, “Finite Element Analysis Based Approach for Stress Concentration Factor Calculation”, Fatigue Durability India, Sept, 2016, Bangalore
32 A Kumar Saxena, M Anupoju, A Tewari, P Pant, Effect of Grain Size on Deformation Twinning Behavior of Ti6Al4V Alloy, Materials Science Forum 830, 337-340, 2015
31 AK Saxena, A Tewari, P Pant, Loading and texture bias on the competitive slip activity for basal and prismatic slip systems in HCP alloys, IOP Conference Series: Materials Science and Engineering 82 (1), 012009, 2015
30 D. S Chawan, H. Shah, A. Tewari, K. P. Desai, ‘Parametric CAD Modeling of Generic Milling Cutter using Application Programming Interface’, 5th National Conference on Recent Advances in Manufacturing, RAM 2015, Surat.
29 Ashish Kumar Saxena, Asim Tewari, Prita Pant, paper on "Loading and Texture bias on the competitive slip activity for basal and prismatic slip systems in HCP alloys" published in Volume 82 of IOP Conference Series: Materials Science and Engineering doi: http://dx.doi.org/10.1088/1757-899X/82/1/012009
28 Ashish Kumar Saxena, Asim Tewari, Prita Pant, paper on title " Effect of Grain Size on Deformation Twinning Behavior of Ti6Al4V Alloy " accepted at International Conference on Advance Materials and Manufacturing Processes for Strategic Sectors (ICAMPS 2015) proceeding
27 Ahmad Omar, K.Narasimhan, Asim Tewari, Effect of Weld on Strain Path and Necking Behaviour during Tube Hydroforming Process, Proceedings of IDDRG 2015 , pp-957-968 , Shanghai, China
26 Asim Tewari, Deepak Kundalkar, Role of precipitate thermodynamics in designing automotive forgings, AUTOMOTIVE STEELS, Metallurgical and Material Engineering Department, Jadavpur University, Kolkata 700032, India, August 2014.
25 HariVithasthYagani, Pravin M. Kulkarni, K.P. Karunakaran, DhirendraRana, Asim Tewari, Characterization of Additive ManufacturedObjects, Proceedings of the World Congress on Engineering 2014 Vol II,WCE 2014, July 2 - 4, 2014, London, U.K.
24 Ahmad Omar , P.Kartheek , ShabbirMemon, K.Narasimhan Prediction and Validation of forming limit strain during tube Hydroforming, AIP Proceedings , NUMISHEET2014 :Melbourne- Australia
23 Asim Tewari, Deepak Kundalkar Design of thermo-mechanical treatment based on precipitate thermodynamics and stability, 4th Gleeble User Workshop India and National Conference on Thermo-mechanical Simulation Using Gleeble Systems at IIT Madras, Chennai, 10th July, 2014
22 YogeshGaikhe, Asim Tewari, S. S. Joshi, 'Effect of Single shot Drilling on Multilayered Metallic-Composite Stack', INCCOM-13 Conference 2014
21 VinayakKhandare, Taha S. Khot H. K. Rawal, Asim Tewari, 'Multi-physics Simulation of Process Induced Deformation in Composites Incorporating Effects of Flow Compaction', INCCOM-13 Conference 2014
20 Ahmad Omar, K.Narasimhan, Asim Tewari, Study of Formability of THF of steel using Thickness Gradient criterion, International Conference on Emerging Materials and Processes, ICEMP-2014, 26-28 February, Bhubaneswar Orissa – India.
19 A. Tripathi, I. Samajdar, A. Tewari, A.K. Kanjarla, N. Srinivasan, G.M. Reddy, J.F.Nie, Texture and microstructure developments during friction stir processing of magnesium alloy AZ31, Volume 3, 2013, Pages 1516-1517, Materials Science & Technology, Montreal, Canada, 2013
18 JiteshVasavada, Taha S. Khot, ShivamAsthana, Asim Tewari, Multi-Scale Modeling Using Continuum Approach to Study the Interfacial Stress in CFRP, INCCOM-12, Bangalore, December 2013
17 Jainil Bhatt, Taha S. Khot, JiteshVasavada, Harshit Dave, Asim Tewari, Multi-Gate Resin Infusion Simulation in Liquid Composite Molding Process, INCCOM-12, Bangalore, December 2013.
16 Taha S. Khot, VinayakKhandare, JiteshVasavada, K. P. Desai, Asim Tewari, Multiphysics Simulation of Process Induced Deformations in Polymer Matrix Composites, INCCOM-12, Bangalore, December 2013.
15 ShabbirMemon , Ahmad Omar , K.Narasimhan Finite element Analysis for optimizing process parameter for tube hydroforming ; - Proceedings of IDDRG 2013 Zurich Switzerland - pp 413-418
14 MarrapuBhargava, Asim Tewari and Sushil Mishra, ,Procedia Engineering, Vols. 64, 1252-1258, 2013.
13 A. Tripathi, I. Samajdar, A. Tewari, A.K. Kanjarla, N. Srinivasan, G.M. Reddy, J.F.Nie, Texture and microstructure developments during friction stir processing of magnesium alloy AZ31, Volume 3, 2013, Pages 1516-1517, Materials Science & Technology, Montreal, Canada, 2013.
12 MarrapuBhargava, Asim Tewari and Sushil Mishra, Strain Path diagram simulation of AA 5182 Aluminum Alloy, ICONDM, July 2013.
11 Sanjeev Kumar , K. Narasimhan, Asim Tewari, Vijay Hiwarkar Multimodality Characterization Of Burr Edge In Sheet Blanking, IDDRG 2013 Conference June 2 – 5, 2013, Zurich, Switzerland
10 MarrapuBhargava, Asim Tewari and Sushil Mishra, Formability of TWIP steel, IDDRG 2012, November 2012.
9 SagarTelrandhe, K. Narasimhan, H.K. Raval, Asim Tewari, Effect of strain path on Formability of Al6061 O alloy, IDDRG 2012, IIT-Bombay, November 2012.
8 Vivek Kumar Barnwal, Asim Tewari and K.Narasimhan, Development of Single Point Incremental Sheet Forming, IDDRG 2012, IIT-Bombay, November 2012.
7 HarnishLakhani, Shashikant Joshi, Asim Tewari, Suhas Joshi, Micro structural modeling of machining of Ti6Al4V, ICOMM 2012, The 7th International Conference on Micro Manufacturing (ICOMM 2012), No. 120, at Northwestern University, Chicago,March 12-14, 2012
6 Shashikant Joshi, Jay Ramchandani, Asim Tewari, Suhas Joshi, Machinability assessment of Ti6Al4V under mist jet cooling, Proceedings of the International Conference on Innovations in Design and Manufacturing, December 5-7, 2012, Jabalpur, India.
5 Shashikant Joshi, PravinPawar, Suhas S. Joshi, Asim Tewari, Microstructural aspect of the chip morphology in orthogonal turning of Ti6Al4V, Page no.666, Twenty-First International Symposium On Processing and Fabrication of Advanced Materials (PFAM XXI) December 10-13, 2012, I I T, Guwahati, India
4 Shashikant Joshi, PravinPawar, Asim Tewari, Suhas Joshi, Machinability assessment of titanium alloy under various machining environments, Twenty-First International Symposium On Processing and Fabrication of Advanced Materials (PFAM XXI) December 10-13, 2012, I I T, Guwahati, India
3 PravinPawar, Shashikant Joshi, Asim Tewari, Suhas Joshi, Evaluation of tool wear mechanisms in machining of three different types of titanium alloys, Page no.345-348, 4th International and 25th AIMTDR Conference 2012, Jadhavpur University, Kolkata.
2 Shashikant Joshi, PravinPawar, Suhas Joshi, Asim Tewari, Deformation mechanism in orthogonal machining of titanium alloys with varying alpha-beta phase fraction, Page no. 311-315, Vol.1, 4th International and 25th AIMTDR Conference 2012, Jadhavpur University, Kolkata
1 Shashikant Joshi, HarnishLakhani , Asim Tewari, Suhas Joshi , Analysis of chip forming in orthogonal machining of titanium alloyTi6Al4V, Page no.438 to441 An International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING On December 10-11, 2011 at College of Engineering, Pune 2012

 

 

© Copyright 2007 Asim Tewari. All Rights Reserved.

design